LOAD

A run of low hits or chords can make the compressor react differently from a single hit. LOAD sets that accumulated low-frequency load and its influence on headroom and detection. Listen to the weight of the whole group.
Diode-bridge compressor · cohesion & weight
BRIDGE brings the firm, colourful character of vintage diode-bridge compression to groups and buses. Let a drum kit respond more like one instrument, connect layered guitars or hold a horn section together. THRESHOLD, RATIO and RECOVERY shape the movement; IRON adds amplifier colour to taste.
No iLok required
macOS · Apple Silicon + Intel

Diode-bridge compressor · cohesion & weight
The diode-bridge tradition is BRIDGE’s starting point: compression with weight and a distinct response to drive. Our emphasis is on connecting several parts. Choose how much the group should move when a snare, a low chord or a shared horn entry comes in harder.
VINTAGE MODIFIED
This is Vintage Modified: the cohesion of diode-bridge compression, with LOAD and IRON to set the grip and weight of a bus or complete mix.

A run of low hits or chords can make the compressor react differently from a single hit. LOAD sets that accumulated low-frequency load and its influence on headroom and detection. Listen to the weight of the whole group.

For a denser, more coloured group, IRON sets the extra amplifier colour. Set the compression first, then add what helps the guitars, drums or horns in the mix.
LOAD changes how accumulated low energy influences behaviour; SC FILTER changes how much low end reaches the detector. IRON is a separate colour layer. Compression keeps working with IRON at zero.
SOUND CHARACTER
Holds the core together and gives the part weight and cohesion.
IN THE MIX
Listen to kick, snare and overheads when the snare is struck harder. Look for gentle shared movement. If the kick pushes the whole bus down too far, compare SC FILTER and the amount of LOAD.
Double-tracked rhythm guitars can jump forward independently. Try containing them a little as a group so their accents feel more connected. Add IRON afterwards, especially when the amps already provide plenty of colour.
Saxes, trumpets and trombones should arrive as a section without one sharp entry taking over. Set THRESHOLD against shared accents, then use RECOVERY to judge the space before the next entry.
On an instrument group or full mix, look for a small shared response to stronger moments. Keep low piano notes or bass from unintentionally pushing everything down. Compare at equal volume over the whole passage.
Choose the movement in the full mix; set the amount to suit the recording.
IN YOUR SESSION
Start with gentle compression and little IRON. Set THRESHOLD, ratio and recovery on a passage with shared accents. Then judge LOAD and colour. Compare with Match Level: do the parts connect without losing the kick, string attack or horn entry?
Exact values appear briefly in one fixed position at the bottom when you point to or adjust a control. You can still type a value directly and confirm it with Enter. The panel stays calm while you work.
Start with one of 30 presets grouped by application, then make it fit your track. The illustrated guide inside the plugin explains the controls with real interface images.
BRIDGE / FAQ
About its sound, controls and the 14-day free demo.
BRIDGE is a Vintage Modified diode-bridge compressor. Its starting point is cohesion with weight and colour: getting separate parts to respond as a group. Use THRESHOLD, RATIO and RECOVERY for the movement, then add extra amplifier colour to taste with IRON.
Yes. Try gentle shared compression on drums, layered guitars, a horn section or the full mix. Set the response using a passage with strong accents and listen for space around the kick, string attacks and melody. Compare with Match Level rather than extra volume alone.
LOAD controls how accumulated low-frequency energy influences headroom and detection. IRON is a separate additional colour layer. Set the compression first, assess the weight with LOAD, then add as much IRON as the group needs.
SC FILTER reduces how much low end reaches the detector. Also compare the amount of LOAD and set RECOVERY around the space between accents; AUTO adds a response to earlier music. Use MIX if you want to bring more of the direct group back.
Yes. Create an account, download BRIDGE and start the demo from the plugin through your account. You have 14 days to assess its sound and controls on your own tracks.
14-day free demoThe current BRIDGE download is for macOS 11 or later, on Intel and Apple Silicon. AU and VST3 are included. Choose the format supported by your DAW.